Specifications
download Questions about this
product Features
﹣High precision, high spindle speed with 24 speeds changes.
﹣Ground gear and kinetic-balanced spindle runs smoothly with low
noise.
﹣Camlock spindle nose, easy to clamp.
﹣Big thru-bore of spindle to hold bar stock with large diameter.
﹣Big swing over bed suitable for hold special shaped workpiece and
dishlike workpiece with large diameter.
﹣High grade casting bed, hardened and precision ground guideways.
﹣Left-handwheel apron and right-handwheel apron are available for
users to choose. Each of them equipped with a quick travel device
and an easy operated level.
﹣Three-axis sliding mechanism in feed box, giving big feeds and
threads ranges. Quick and easy speeds and threading changes.
﹣Tailstock spindle can move at two speeds. Drilling is very easy.
The scale on the handwheel indicates the distance the spindle
moves.
﹣On user’s request, the following accessories are available: foot
brake, taper turning attachment, thread chasing dia (metric or
inch), mechanical stop divice quick-change tool post,
centralization lubrication device and cross feed quick-release
lever.
Main specifications Model | CS6166B | CS6266B | CS6166C | CS6266C | Capacity | Swing over bed | 600mm | Swing over cross slide | 420mm | Swing in gap | 870mm (gap bed lathe) | Length in gap | 240mm (gap bed lathe) | Max. length of workpiece | 100/1500/2000/3000mm | Head stock | Spindle nose | ISO702/II No. 8 Camlock | Spindle bore | Ø82mm | Ø105mm | Taper of spindle bore | Ø90mm | Ø113mm | Range of spindle speed | 9-1600rpm 24 steps | 36-1600rpm 12 steps | Max. output of spindle torque | 1500 N.m | 1200 N.m | Feeds andthreads | Max. travel of compound rest | 145mm | Max. travel of cross slide | 310mm | Leadscrew pitch | 12mm or 2 TPI | Section of tool | 25x25mm | Spindle center to tool support | 28mm | Longitudinal quick moving speed | 4.5m/min, 50HZ ; 5.4m/min, 60HZ | Crosswise quick moving speed | 1.9m/min, 50HZ ; 2.3m/min, 60HZ | Longitudinal feeds range | 93 kinds, 0.028-6.43 mm/rev | 65 kinds, 0.063-2.52 mm/rev | Cross feeds range | 93 kinds, 0.012-2.37mm/rev | 65 kinds, 0.027-1.07 mm/rev | Metric threads range | 48 kinds, 0.5-224 mm | 22 kinds, 1-14 mm | Inch threads range | 49 kinds, 72-1/8 TPI | 25 kinds, 20-2 TPI | Module threads range | 42 kinds, 0.5-122 mm | 18 kinds, 0.5-7 mm | Diametral threads range | 45 kinds, 56-1/4 DP | 24 kinds, 56-4 DP | Tailstock | Dia. of tailstock sleeve | Ø75mm | Morse taper of tailstock sleeve | MT5 | Travel of tailstock sleeve | 150mm | Cross adjustment | +15mm | Motor | Power of main motor | 7.5KW (10HP), 3PH, 1450rpm/50HZ; 1750rpm/60HZ | Power of quick-travel motor | 250W (1/3HP), 3PH | Power coolant pump | 90W (1/8HP), 3PH | Available voltage/cycle | |
|
